Mitutoyo Mu Checker System with Analog Differential Indicator

The Mu checker indicator system can be used to measure soft workpieces, such as the warp of a LCD panel, due to the low measuring force used by the probe. The system consists of the indicator display and your choice of probe (select when ordering).

Note: This system can accommodate up to two probes, but this package only includes 1 probe. Additional probes may be purchased here.

The indicator has the following specifications:

• Display range: ±5µm/ ±15µm/ ±50µm/ ±150µm/ ±500µm/ ±1500µm OR ±0.00015"/ ±0.0005"/ ±0.0015"/ ±0.005"/ ±0.015"/ ±0.05"
  
• Resolution: 0.1µm/ 0.5µm/ 1µm/ 10µm/50µm OR 0.000005"/ 0.00001"/ 0.00005"/ 0.0001"/ 0.0005"/ 0.001"
  
• Differential mode: ± A, ±B, ± A± B
  
• Display accuracy: ± 1%
• Analog output accuracy: ± 0.1%
  
• Size: 134mm W x 183mm D x 208mm H
• Weight: 2.4 kg

Choose from the following probes:

Lever head type: Lever head 0.2N Force 519-521, Lever Head 0.02N Force 519-522, Lever Head Adjustable Force 519-326, or Lever Head 0.15N Force 519-327

Cartridge head type: Cartridge Head Low Force with 12mm stem 519-331, Cartridge Head Low Force with 3/8 inch stem 519-332, Cartridge Head Compact Type 519-347, or Cartridge Head Standard Type 519-348

Here is a comparison of the available probe types.

NOTE: This item is not returnable.

Mitutoyo Part # 519-554A (indicator), probes: 519-521, 519-522, 519-326, 519-327, 519-331, 519-332, 519-347, or 519-348