Mitutoyo Cartridge Head Probe for Mu Checker with Low Measuring Force with 12mm stem

The cartridge head probe plugs into a Mu checker indicator and is used to measure even soft workpieces, such as the warp of a LCD panel, due to the low measuring force used by the probe. NOTE: This is only the probe. The indicator is available for purchase separately.

A comparison of the available Mu checker probes can be found here.

The probe has the following specifications:

• Measuring range: ± 0.5mm
  
• Stylus stroke: ± 0.65mm
• Measuring force: ~0.25N
  
• Stem Diameter (mm): Ø8
  
• Linearity: ±0.5%
  
• Size: ~76mm W x 12mm D x 12mm H (probe only, not including cable). Cable is 2m long and has a MAS-5100 (DIN5P) attachment at one end that connects to the Mu checker indicator.
  
• Interchangeable probe tip: Thread size of tip is M2.5x5, and the tip may be exchanged for another compatible type.
  
• Additional compatible probe tips may be purchased here.
  
• Mu checker indicators can be purchased here.
  

NOTE: This item is not returnable.

Mitutoyo Part # 519-331