Mitutoyo Digimatic Micrometer Head Flat Spindle Face 0-1"

This Mitutoyo digimatic micrometer head has a flat carbide tipped spindle face. Error proof readings are achieved with the digital LCD display. Models with plain stems and stems with a clamp nut are available.

Contact Microscope World for information on having this instrument calibrated.

• Range = 0-1" / 0-25.4mm
• Accuracy = +/- 0.0001"
• Resolution = 0.00005"/ 0.001mm
  
• Stem diameter = 0.375"
• Stem type = Plain or with clamp nut. Select when ordering.
• Measuring force = 5-10N
• Spindle face = Flat, carbide tip
  
• Data Output = Yes, use water resistant SPC cable with data switch.
  
• Display = LCD
  
• Battery = SR44, battery life approximately 2 year under normal use.
• Functions = inch/mm conversion, data output, function lock, 2 presets, low voltage alarm, counting value composition error alarm.

For a complete digimatic system, an SPC cable with data switch is required for each micrometer head and the MIG-2USB interface unit is required for measurement data readouts to a PC.

Mitutoyo Part # = 350-351-30, 350-352-30
NOTE: This item is not returnable.