Mitutoyo Micrometer Inspection Steel Gage Block Set, 0.0625-2 inch with Optical Parallel

These gage blocks are designed for inspecting a variety of micrometers. These Mitutoyo gage blocks are made of steel and have high accuracy. All gage blocks are furnished with certificates of inspection. The provided case has a unique serial number, and each block has a certification number. Choose the desired grade of block when ordering. The recommended grade for various applications is described below:

• Grade K: These gage blocks are of the highest accuracy and are intended for use within a temperature-controlled inspection room or calibration laboratory. They are designed to be used as masters and are manufactured by absolute measurement using an interferometer.
• Grade 00: These higher accuracy gage blocks are designed to be used in a controlled environment and are mainly used as reference standards for setting high-precision measuring equipment and for calibrating lower grade gage blocks.
• Grade 0: This grade of gage blocks is designed to be used within an inspection area to verify the accuracy of plug and snap gages and for setting electronic measuring devices.
• Grade AS-1: Gage blocks of this grade are designed to be used on the shop floor to set and calibrate fixtures and precision instruments.
  

A total of 9 blocks are included in this set.

Block Sizes (inches):0.0625, 0.100, 0.125, 0.200, 0.250, 0.300, 0.500, 1, 2

Includes optical parallel (t = 0.5") for measuring parallelism.

NOTE: This item is not returnable.

Mitutoyo Part #s 516-554-56, 516-929-26, 516-930-26, 516-931-26