Richter Optica S6LCD-DL Stereo Zoom Microscope 7x-45x

The Richter Optica S6LCD-DL is a stereo zoom microscope with zoom magnification of 7x - 45x on a compact LED dual light track stand with a HD 1080p camera and 13" HD monitor for viewing live images or capturing images.

Head: Trinocular body. Viewing head rotates 360°, locks in place by tightening set screw. Includes 0.35x c-mount adapter.

Eyepieces: Includes widefield 10x / 20mm high eyepoint eyepieces. Interpupillary adjustment from 50mm to 75mm. Dual diopters on both eyetubes. Eyepieces accept 24mm diameter reticle. 15x and 20x eyepieces are available and can be ordered below.

Objective Lenses: Zoom range of 0.7x - 4.5x.

Zoom Ratio: 6.4:1

Total Magnification: 7x - 45x. For alternate magnifications eyepieces can be changed and auxiliary lens added to stereo microscope. View magnification chart here for details.

Specimen Stage: Supplied with a 100mm frosted plastic stage plate and two locked-on stage clips.

Stand: Rugged cast metal frame with white enamel finish. The head moves up and down on track stand with total Z-travel of 4.5". Built-in top and bottom illumination. Focusing holder has top LED light built into it. Bottom LED light shines up through stage plate.

Working Distance: 100mm

Maximum Specimen Height: 3.81" (96.85mm).

Focusing: Rack & pinion focusing and special tension adjustment located on focusing knobs to adjust tension.

Illumination: Transmitted and reflected LED illumination with intensity rheostat control and on/off switch for each light.

Size & Weight: Base is 7.5" W x 11" D, 11.5" H, 9 lbs

Camera: HD 1080p camera, live resolution 1920x1080 pixels. 2mp image capture to USB flash drive (not included). Live image 1080p / 60 fps. HDMI connection to 13" HD monitor. Camera controls for exposure, gain, white balance, color adjustment, sharpness. Includes mouse for on-screen controls. HDMI direct connection to monitor.

Software Calibration: If you plan to make measurements using the software you will need to calibrate the microscope. Calibrating your software with the microscope requires use of a stage micrometer. When ordering please select this option if you do not already have a stage micrometer. The stage micrometer included is a dual ruler with 1" equally spaced and numbered 0-10 as well as 25mm equally spaced and numbered 0-25. If NIST certification is selected 10 points in total will be certified. Please note that NIST certification takes approximately 2 weeks.

LCD HD Monitor: 13" LCD HDMI monitor, 1080p. LED backlight. Monitor mounts directly to the HD camera and includes 110~240V power cord and HDMI cable.

Warranty: 5 Year warranty on microscope, 1 year on camera and monitor.

Click here for Instruction Manual