OptiScan Focus Only Controller

The Prior Scientific OptiScan focus controller offers a low cost solution for applications including extended focus or Z-stacking. The controller automates microscope focusing and provides a clear display showing the current position at all times while separate controls are provided for rapid movement up or down along the facility to change the speed of the focus movement. A manual focus knob is also provided for manual fine focusing and ease of operation.

OptiScan Focus Only Controller Specifications:

• Resolution: Programmable to 10 nanometers. Factory default is 100nm. Minimum resolution with optical encoder is 50nm.
  
• Speed: 1600 microns/second
  
• Buttons: Set zero, speed setting, move up, move down
  
• Display: Position
• Compatible with: H122 or H122E Focus Motors (sold separately)
  
• COM Port Communications Protocol: 8 bit word, 1 stop bit, no parity, no handshake
  
• Computer Interface: RS232/USB, 9600 baud
  
• Power: Universal 110~240V, 50-60Hz
• Size: 160mm x 125mm x 60mm
  
• Warranty: 3 Years
• NOTE: This product is controller only, does not include focus motor or adapter sleeve.
  

View the OptiScan ES10ZE Focus Only Controller Brochure

NOTE: This item is not returnable.

Prior Scientific Part #s ES10ZE.