Mitutoyo Square Metric Gage Block Set, 76 Blocks

These steel square gage blocks retain stable orientation both laterally and longitudinally. These blocks can be used for many different applications including the positioning of cutting tools, angle measurement with a sine bar, taper measurement with a roller, and the inspection of depth micrometer. Choose the desired grade of block when ordering. The recommended grade for various applications is described below:

• Grade 00: These higher accuracy gage blocks are designed to be used in a controlled environment and are mainly used as reference standards for setting high-precision measuring equipment and for calibrating lower grade gage blocks.
• Grade 0: This grade of gage blocks is designed to be used within an inspection area to verify the accuracy of plug and snap gages and for setting electronic measuring devices.
• Grade AS-1: Gage blocks of this grade are designed to be used on the shop floor to set and calibrate fixtures and precision instruments.
• Grade AS-2: These gage blocks are designed to be used with mounting tools and cutters.

Refer to the table below for the blocks included in this set. A total of 76 blocks are included in this set.

NOTE: This item is not returnable.

Mitutoyo Part #s 516-449-26, 516-450-26, 516-451-26, 516-452-26