Mitutoyo Micrometer Inspection CERA Gage Block Set, 0.105-1 inch

These rectangular gage blocks are designed for inspecting a variety of micrometers and have high accuracy. These Mitutoyo gage blocks are made of CERA, which is a ceramic material with superior surface quality. Some advantages of CERA is that it is corrosion-resistant, abrasion resistant, and resistant to burr formation. The provided case has a unique serial number, and each block has a certification number. Choose the desired grade of block when ordering. The recommended grade for various applications is described below:

• Grade K: These gage blocks are of the highest accuracy and are intended for use within a temperature-controlled inspection room or calibration laboratory. They are designed to be used as masters and are manufactured by absolute measurement using an interferometer.
• Grade 00: These higher accuracy gage blocks are designed to be used in a controlled environment and are mainly used as reference standards for setting high-precision measuring equipment and for calibrating lower grade gage blocks.
• Grade 0: This grade of gage blocks is designed to be used within an inspection area to verify the accuracy of plug and snap gages and for setting electronic measuring devices.
• Grade AS-1: Gage blocks of this grade are designed to be used on the shop floor to set and calibrate fixtures and precision instruments.

A total of 10 blocks are included in this set.

Block Sizes (inches):0.105, 0.210, 0.315, 0.420, 0.500, 0.605, 0.710, 0.815, 0.920, 1

Includes optical parallel (t = 0.5") for measuring parallelism.

NOTE: This item is not returnable.

Mitutoyo Part #s 516-559-56, 516-321-26, 516-322-26, 516-323-26