Metkon EPOCOLD Epoxy Resin for Cold Mounting 90 Minute Cure

Metkon EPOCOLD Epoxy Resin for Cold Mounting 90 Minute Cure

No reviews yet Write a Review

Cold mounting is the preferred method for preparing samples that are sensitive to damage from heat and pressure such as coatings and PCB. EPOCOLD Epoxy cold mou…

SKU:

$653.00 - $5,252.00

Hurry up! Current stock:

Quantity:

Request a quote

Description

Cold mounting is the preferred method for preparing samples that are sensitive to damage from heat and pressure such as coatings and PCB. EPOCOLD Epoxy cold mounting resin has low shrinkage and moderate hardness. The system consists of resin and hardener, which are to be used in a ratio of 4 parts resin to 1 part hardener. Choose from 2 different of quantities of resin and hardener when ordering.

Resin (select quantity when ordering): EPOCOLD-R90 epoxy resin, 64 ounces or 5 gallons
Hardener (select quantity when ordering): EPOCOLD-H90 epoxy hardener, 16 ounces or 160 ounces
Curing time: 90 minutes, heat required
Color: Clear, transparent

Metkon Part #s 29-5090MR-64oz / 29-5090MH-16oz or 29-5090MR-5G/ 29-5090MH-128oz and 29-5090MH-32oz

NOTE: This item is not returnable.

Customer reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write a Reviews

Description

Resin (select quantity when ordering): EPOCOLD-R90 epoxy resin, 64 ounces or 5 gallons
Hardener (select quantity when ordering): EPOCOLD-H90 epoxy hardener, 16 ounces or 160 ounces
Curing time: 90 minutes, heat required
Color: Clear, transparent

Metkon Part #s 29-5090MR-64oz / 29-5090MH-16oz or 29-5090MR-5G/ 29-5090MH-128oz and 29-5090MH-32oz

NOTE: This item is not returnable.