Metkon EPOCOLD Epoxy Resin for Cold Mounting 9 hour Cure

Cold mounting is the preferred method for preparing samples that are sensitive to damage from heat and pressure such as coatings and PCB. EPOCOLD Epoxy cold mounting resin has low shrinkage and moderate hardness. The system consists of resin and hardener, which are to be used in a ratio of 2 parts resin to 1 part hardener.

• Resin: EPOCOLD-R9 epoxy resin (32 ounces)
  
• Hardener: EPOCOLD-H9 epoxy hardener (16 ounces)
  
• Curing time: 9 hours
• Color: Clear, transparent
  
• Peak temperature: 40-60º C
  

Metkon Part #s 29-509R and 29-509H