Thickness Measurement

This Mitutoyo thickness gage has straight blades with 13mm width. Each leaf is marked with thickness and each leaf can be detached. Range 0.05mm - 1mm (13 Leaves) Blade Type Straight blade, 13mm width Blade Length 100mm Leaf Composition 0.05-0.3mm by 0...

This Mitutoyo thickness gage has straight blades with 13mm width. Each leaf is marked with thickness and each leaf can be detached. Range 0.05mm - 1mm (13 Leaves) Blade Type Straight blade, 13mm width Blade Length 150mm Leaf Composition 0.05-0.3mm by 0...

This Mitutoyo thickness gage has straight blades with 13mm width. Each leaf is marked with thickness and each leaf can be detached. Range 0.05mm - 1mm (20 Leaves) Blade Type Straight blade, 13mm width Blade Length 150mm Leaf Composition 0.05-1mm by 0...

This low force measurement system offers a separate measuring unit and display unit allowing the system to be integrated into the user's existing measurement system. It has a motor driven spindle that moves up and down stopping when the contact point...

This low force measurement system features an integrated display and has a motor driven spindle that moves up and down stopping when the contact point touches the workpiece. It has a ceramic measuring table that is corrosion free for easy storage and...

This Mitutoyo groove thickness gage has a knife-shaped anvil and plunger to enable contact with the bottom of grooves. Range 0-0.5" Graduation 0.001" Accuracy +/-0.001" Stem 3/8" Measuring Force 1.4N or less Mitutoyo Part # 7316A (Previously part#...

This Mitutoyo groove thickness gage has a knife-shaped anvil and plunger to enable contact with the bottom of grooves. Range 0-0.47" / 0-12mm Resolution 0.0005" / 0.01mm Accuracy +/-0.001" Data Output USB-ITN-F (F) and U-Wave-T SPC Cable (F) Stem...

This Mitutoyo tube thickness gage has a ball anvil and a point contact that makes this thickness gage ideally suited for measuring the wall thickness of tubes. Range 0-10mm Graduation 0.01mm Accuracy +/-15µm Stem 8mm Measuring Force 1.4N or...

This Mitutoyo tube thickness gage has a ball anvil and a point contact that makes this thickness gage ideally suited for measuring the wall thickness of tubes. Range 0-0.47" / 0-12mm Resolution 0.0005" / 0.01mm Accuracy +/-0.001" Data...

This Mitutoyo lens thickness gage has a reversible anvil to allow a radiused contact face to be brought into use opposite the flat plunger face. This thickness gage is made for measuring components with a concave surface such as lenses. Range...

This Mitutoyo lens thickness gage has a reversible anvil to allow a radiused contact face to be brought into use opposite the flat plunger face. This thickness gage is made for measuring components with a concave surface such as lenses. Range 0-0...

This Mitutoyo lens thickness gage has a reversible anvil to allow a radiused contact face to be brought into use opposite the flat plunger face. This thickness gage is made for measuring components with a concave surface such as lenses. Range 0-0.47" /...