Digital High Resolution Electronics Inspection Articulated Arm Microscope 6.7x-45x

The Fein Optic digital electronics inspection stereo zoom microscope provides zoom magnification of 6.7x - 45x and is on an articulated arm stand with polarizing LED ring light to reduce glare on electronic parts. Magnification range can be adjusted by using different eyepieces or auxiliary lenses. Includes a 5 mega pixel camera with software for capturing and saving images and includes measurement features.

• Head: 45º inclined trinocular body. Viewing head rotates 360°. Interpupillary distance adjustment from 54mm - 76mm. When beam splitter is engaged light is split between left eyetube and trinocular port, while right eyetube goes dark. Trinocular and digital options includes 0.5x c-mount adapter.
• Eyepieces: Includes widefield 10x / 22mm high eyepoint eyepieces. Interpupillary adjustment from 54mm to 76mm. Dual diopters +/-5 on each eyetube. Eyepieces accept 24mm diameter reticle. 15x/16mm and 20x/12mm eyepieces are available and can be ordered below.
• Objective Lenses:  Zoom range of 0.67x - 4.5x. 
• Zoom Ratio: 6.7:1
• Total Magnification:  6.7x -45x. For alternate magnifications eyepieces can be changed and auxiliary lens added to stereo microscope. View magnification chart below for options.
• Stand: Short articulated armstand clamps to table. Clamp opening size is 0-53mm. Distance of total articulated arm is 54". Height of articulated arm is adjustable.
• Working Distance: 100mm.
• Focusing: Coarse focusing. Focus knob is tightness adjustable.
• Illumination: LED polarizing ring light to reduce glare. 120 LED lights provide cool, bright illumination. Light intensity rheostat control 0-100%. Rotatable analyzer 360º, polarizer drops into slot and is removable. 100~240V, UL and CE certified.
• Camera: Includes 0.35x C-mount adapter and USB3.0 5.1 mega pixel camera with software. Software can be used to capture and save images (PC or MAC) or make measurements (PC only).
• Software Calibration: If you plan to make measurements using the software you will need to calibrate the microscope. Calibrating your software with the microscope requires use of a stage micrometer. When ordering please select this option if you do not already have a stage micrometer. The stage micrometer included is a dual ruler with 1" equally spaced and numbered 0-10 as well as 25mm equally spaced and numbered 0-25. If NIST certification is selected 10 points on each scale will be certified. Please note that NIST certification takes approximately 2 weeks.
• Size & Weight: Length of articulated arm is 54", 16 lbs.
• Warranty: 5 Year warranty on microscope, 1 year on camera.
• Instruction Manual

EI-FZ6D-sAARM