Micrometer Standards

This micrometer standard is used for the zero point setting of a v-anvil micrometer.  Diameter 0.4" Type Plug Accuracy +/- 0.0001" Case supplied in a fitted carton. Mitutoyo part # 167-338NOTE: This item is not returnable.

This micrometer standard is used for the zero point setting of a v-anvil micrometer.  Diameter 0.2" Type Plug Accuracy +/- 0.0001" Case supplied in a fitted carton. Mitutoyo part # 167-337NOTE: This item is not returnable.

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 50mm Thread angle: 55º or 60º Accuracy: +/- 6µm Case: supplied in a fitted carton. Mitutoyo part # = 167-274,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 6" Thread angle: 55º or 60º Accuracy: +/- 0.0004" Case: supplied in a fitted carton. Mitutoyo part # = 167-288,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 50mm Thread angle: 55º or 60º Accuracy: +/- 5µm Case: supplied in a fitted carton. Mitutoyo part # = 167-273,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 5" Thread angle: 55º or 60º Accuracy: +/- 0.00035" Case: supplied in a fitted carton. Mitutoyo part # = 167-287,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 4" Thread angle: 55º or 60º Accuracy: +/- 0.0003" Case: supplied in a fitted carton. Mitutoyo part # = 167-286,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 3" Thread angle: 55º or 60º Accuracy: +/- 0.00025" Case: supplied in a fitted carton. Mitutoyo part # = 167-285,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 250mm Thread angle: 60º Accuracy: +/- 1µm Case: supplied in a fitted carton. Mitutoyo part # = 167-271 NOTE: This...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 25mm Thread angle: 55º or 60º Accuracy: +/- 4µm Case: supplied in a fitted carton. Mitutoyo part # 167-272,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 250mm Thread angle: 55º or 60º Accuracy: +/- 13µm Case: supplied in a fitted carton. Mitutoyo part # = 167-281,...

This micrometer standard is used for the zero point setting of a screw thread micrometer.  Length: 225mm Thread angle: 55º or 60º Accuracy: +/- 12µm Case: supplied in a fitted carton. Mitutoyo part # = 167-280,...