Stereo Track Stand HD Digital Microscope

The FZ6 high resolution stereo zoom microscope on a track stand with LED ring light includes a high definition HD camera and monitor.

• Microscope Viewing Head: Trinocular 45º inclined viewing head rotates 360º. Interpupillary adjustment from 54mm - 76mm. Beam splitter splits light between left eyetube and trinocular port while right eyetube goes dark. Includes 0.5x c-mount adapter.
• Eyepieces: Includes high eyepoint widefield focusable 10x eyepieces, FN 22 with +/-5 diopter adjustment on each eye.  Eyepieces accept a 24mm diameter reticle.
• Objective Lenses: Zoom range of 0.67x - 4.5x.
• Zoom Ratio: 6.7:1
• Total Magnification: 6.7x - 45x.  Magnification can be increased or decreased with auxiliary lenses. See magnification chart below for details. Note that when changing eyepieces the magnification of the camera will not be altered.
• Working Distance: 100mm. Can be adjusted from 26mm - 200mm depending on auxiliary lens utilized. See magnification chart below.
• Field of View: 32.8mm at 6.7x and 4.9mm at 45x.
• Stand: Track stand with ergonomic, low-profile base.
• Specimen Stage: Includes 95mm black and white stage plate with two locked-on stage clips.
• Focusing: Rack and pinion focusing has slip clutch to protect mechanism against over-turning, and special tension adjustment. 120mm focusing stroke.
• Illumination: Includes 4-Quadrant LED ring light with 72 individual LED lights. 100~240V. Includes ring light adapter.
• Camera: Includes 0.5x c-mount adapter and 4K HD camera with HDMI and USB2 output. 1/1.8" Exmor Sony IMX334(C) sensor. Pixels 2.0 x 2.0µm. 30 frames per second at 3840 x 2160 HDMI. Binning 1x1. 8mp image capture to SD card or USB flash drive. Includes software, power adapter 100~240V, HDMI Cable, SD Card, USB Mouse. Software can be used to capture images and video and make measurements. If making measurements with the software you will need a stage micrometer (available when orering).
• Software Calibration: If you plan to make measurements with the software you will need to calibrate the microscope with the software. Calibrating your software with the microscope requires use of a stage micrometer. When ordering please select this option if you do not already have a stage micrometer. The stage micrometer included is a dual ruler with 1" equally spaced and numbered 0-10 as well as 25mm equally spaced and numbered 0-25. If NIST certification is selected 10 points in total will be certified. Please note that NIST certification takes approximately 2 weeks.
• LCD HD Monitor: 13.3" LCD HDMI monitor, true 1080P. LED backlight. Monitor mounts directly to HD camera. Includes 110~240V power cord and HDMI cable.
• Size: 11.75" W x 12" D x  18" H
• Warranty: 5 Years. 1 Year warranty on camera, monitor, and LED ring light.