Richter Optica S6D Digital Stereo Zoom Microscope 7x-45x

The Richter Optica S6D-ILS2 digital stereo microscope has zoom magnification of 7x - 45x and includes a 5.1mp digital camera with software for capturing and measuring images.

Head: Trinocular body. Viewing head rotates 360°, locks in place by tightening set screw. Includes 0.35x c-mount adapter.
Eyepieces: Includes widefield 10x / 20mm high eyepoint eyepieces. Dual diopters on each eyetube. Interpupillary adjustment from 50mm to 75mm. Eyepieces accept 24mm diameter reticle. 15x and 20x eyepieces are available and can be ordered below.
Objective Lenses: Zoom range of 0.7x - 4.5x.
Zoom Ratio: 6.4:1
Total Magnification: 7x - 45x. For alternate magnifications eyepieces can be changed and auxiliary lens added to stereo microscope. View magnification chart here for details.
Specimen Stage: Supplied with a 100mm glass stage plate. A glass stage plate can be added. Two locked-on stage clips.
Stand: Post stand with transmitted and reflected LED illumination. Top light has separate rheostat control from bottom light.
Working Distance: 100mm
Focusing: Coarse focusing adjustment.
Illumination: Transmitted and reflected LED illumination with intensity control and on/off switch for each light.
Camera: Includes 0.35x c-mount adapter and 5.1 mega pixel Sony CMOS camera with basic measure and capture software. Captures images up to 2592x1944. Captures motion video at 20 frames per second (fps) @ 2592x1944, 40fps @ 1296x972.
Stand Size & Weight: 11.5" W x 12" D x 14.75" H, 9.2 lbs.
Warranty: 5 Year warranty on microscope. 1 year warranty on camera.
View Instruction Manual here.
Camera Computer Requirements:
- Windows 7, 8, 10 (32&64bit), Mac OSX 10.6 and higher, Linux (Kernel 2 or above)
- CPU: Intel Core2, 3.8GHz or Higher
- USB Port 2.0 or higher
- RAM: 2 GB or more
Software Calibration: If you plan to make measurements using the software you will need to calibrate the microscope. Calibrating your software with the microscope requires use of a stage micrometer. When ordering please select this option if you do not already have a stage micrometer. The stage micrometer included is a dual ruler with 1" equally spaced and numbered 0-10 as well as 25mm equally spaced and numbered 0-25. If NIST certification is selected 10 points in total will be certified. Please note that NIST certification takes approximately 2 weeks.